Wheel loader AR 320
18.5 kW (25 HP)
0.34 - 0.7 m³
The manoeuvrable wheel loader for gardening, landscaping or agriculture
The weycor AR 320 wheel loader is made for your project. Our construction machine from performance class S cuts a fine figure, especially on narrow construction sites, in gardening and landscaping, in municipal applications or in agriculture. The weycor AR 320 stands for real quality "Made in Germany".
With an operating weight of 2.5 t, an engine output of 18.5 kW (25 HP) and a bucket capacity of 0.34 to 0.55 m³, even the smallest wheel loader in our portfolio brings a lot of power to the road.
|Tear out force||2,430 daN|
|Tipping load, straight||1,512 kg|
|Tipping load, articulated||1,336 kg|
|Lifting capacity at ground level||2,100 daN|
|Operating pressure of steering hydraulics||145 bar|
Differing data for use of pallet forks *
|Static tipping load, straight and articulated||1,114 kg|
|Lifting capacity||1,600 daN|
|Payload 80% even surface **||891 kg|
|Payload 60% uneven surface ***||668 kg|
* Travel with load only permitted close to the ground . ** According to ISO 8313 and EN 474-3 . *** According to ISO 14396, EU RL97/68/EC .
Features and benefits
Powerful drive unit
A weycor wheel loader can be moved in three ways: in operating speed range from 0 to 6.5 km/h, in road speed range at up to 20 km/h or also in optional high speed at up to 40 km/h. Here, 1st and 2nd hydraulic gear as well as forward / reverse travel can be engaged under load. The switching between the forward / backward travel, speed ranges and off-position is done via the weycor joystick. The drive is operated by accelerator and separate inching pedal for best distribution of the hydraulic power for thrust and lifting forces.
In weycor wheel loaders, we use robust, low-maintenance articulated-swivel joints almost exclusively in conjunction with rigid axes. With an oscillation of ±12° in the rear carriage and an articulation angle of 40°, these provide outstanding cross-country mobility, protect the ground and offer extreme manoeuvrability. With their low centre of gravity, weycor wheel loaders have a high tilt stability even under extreme conditions.
Hydraulic quick-change attachment
The hydraulic quick-change attachment turns the wheel loader into an all-rounder and allows attachments to be changed in a few seconds. The proven weycor kinematics provide high breakout forces and excellent lifting heights. The upwardly tapered loader arm offers the best view of the attachment.
As the only manufacturer, our wheel loaders have a separate inching pedal as standard. This prevents the possibility of moving against the operating brake, in contrast to the combination of a brake/inch pedal. A generously proportioned inching range facilitates precise distribution of shearing and lifting forces. The result: less wear and lower fuel consumption.
Latest kinematics technology
The proven and tested weycor kinematics with its exceptional tear-out force and excellent lifting heights. The tapered loading rocker makes sure you can always keep an eye on the attachment.
Low center of gravity
Thanks to their low center of gravity, weycor wheel loaders are secured against tipping, even under extreme circumstances.
In addition to the excellent circumferential visibility in the wheel loader, its clearly arranged controls and its ergonomic design.
Low-maintenance and quick, easy servicing is achieved by central, consolidated, easy-to-reach service points.